Live streaming your wedding, step by step
You don't need a production company to stream a wedding well. You need a steady phone, decent sound, a strong connection and someone you trust to press the button. Here's how to get each one right.
1. Before the day
- Make a bubble. Sign in with your email, make a bubble called something like "Anna & Leo's wedding", and choose who can watch. Anyone with the link is simplest: guests open the link, type their name (and the PIN, if you set one) and watch. People I invite takes a minute more for guests (they sign in once with a code from their email), and in return they can watch the video again afterwards, and the people you invite can film a second angle.
- Send the link early. Put it in the invitation email or a message a week before, with the PIN sent separately. The link stays the same, so it can go out as soon as the bubble exists.
- Pick your streamer. Ask a friend who isn't in the wedding party to run the stream. They don't need any experience.
- Test at the venue. Visit with the phone, check the mobile signal or Wi‑Fi where you'll film, and do a two-minute test live. You'll see exactly what guests will see.
2. Setting up the phone
Put the phone on a tripod at the end of the aisle or slightly to one side, at eye height, so it frames the two of you and the officiant. Film sideways (landscape), which fills a TV. Turn on Do Not Disturb so calls don't interrupt, and plug the phone into a power bank: an hour of 1080p video uses a lot of battery.
The phone films in 1080p by default. If the signal at the venue is weak, choose 720p in the bubble's advanced settings; it uses less data and stays smooth.
3. Getting the sound right
Sound matters more than picture. A phone at the back of a room picks up the room, not the vows. Two easy fixes: put the phone closer (a tripod just behind the front row works), or plug a small wireless microphone into the phone and clip it to the officiant or groom. If there's a sound system, a cable from the mixer into the phone gives the clearest result.
4. Add a second angle (optional)
A second phone at the front, facing the guests, catches faces during the vows. In a bubble for people you invite, up to three members can film the same live; guests switch between the angles themselves, and each camera's video is saved too. (With a link bubble, the couple's phone is the one camera.) How multi-camera works.
5. Going live
Ten minutes before the ceremony, tap Go live. Guests who open the link early see the room filling up, which is half the fun. Your streamer sees how many people are watching and who they are. If you turn chat on, guests can send messages during the stream; nothing they write is stored.
A live can run for up to three hours. For a long day, stop after the ceremony and go live again for the speeches: the link and PIN stay the same, and if you're back within five minutes it stays one video.
6. After the wedding
After you stop, the recording is prepared and appears in the bubble's videos. That takes a little longer than the live itself lasted, so a two-hour ceremony is ready a few hours later. You can download it as an MP4 to keep forever and share it however you like. If you invited guests as members, they can watch it again in the bubble for 7, 30 or 90 days, as you choose. People who watched with the link see the live only.
What you need
- A phone from the last few years (iPhone or Android).
- A tripod or a stand, so the picture stays still.
- A power bank and cable, for anything longer than half an hour.
- A clip-on microphone (optional, but the biggest upgrade you can make).
- A good connection: 4G/5G or Wi‑Fi with about 8 Mbit/s upload for 1080p, or 4 Mbit/s for 720p.
- A second phone for another angle (optional; it needs a bubble for people you invite).
About music: BeamBubble doesn't mute streams automatically the way some public platforms do. That doesn't change the music rules where you are, so check with your venue or musicians if you plan to stream songs that are played or performed.